Aston Martin Cygnet Car Design

Aston Martin Cygnet First Look

Aston Martin Cygnet Rear Side View

Aston Martin Cygnet Interior

ASTON MARTIN MODELS

Aston Martin DBS

2010 Aston Martin Sports Car Rapide Nurburgring Race Car

The Aston Martin Rapide Nurburgring race car has been unveiled today and the company says it will make its debut in the 24-Hour event that will take place on 15/16 May 2010. Previously, Aston Martin has competed in the Nurburgring 24-Hour race with the V8 Vantage and the V12 Vantage. for this year, the British brand goes four-door.

Aston Martin Rapide

For all those who thought Aston Martin had somehow gone soft by offering a four-door saloon, the famed British marque plans to prove the new Rapide is no slouch by entering it in the 38th ADAC Nurburgring 24-hour race on May 15-16. Piloting the vehicle win the grueling race will be none other than Aston Martin’s CEO Dr. Ulrich Bez, who at age 66 can still give the young guns a run for their money. Aston, with Bez at the wheel, has won top honors in the race’s production-based SP8 category for the past two years with versions of the Vantage coupe.

The Aston Martin Rapide Nurburgring will been entered in the race as company's Chief Executive, Dr Ulrich Bez considers this event represents the ultimate durability test for any sports car.

The Aston Martin Rapide Nurburgring is extremely close to the production car. The only differences between the Aston Martin Rapide Nurburgring and the production model include the removal of interior trim to save weight, re-tuned suspension and slick tires.

PRESS RELEASE:

Aston Martin Rapide to contest gruelling Nürburgring 24-hour Race

Gaydon, Warwickshire 6 April 2010. Aston Martin will return to the starting grid of the legendary Nordschleife circuit for the fifth consecutive year at the 38th ADAC Nürburgring 24-hour race on 15/16 May 2010 with the marque's new four-door sports car; the Rapide.

Further underlining the sporting credentials of Aston Martin's latest model, the Rapide will compete in the demanding 24-hour race - as has been the case with other recent Aston Martin road cars, the V8 Vantage and V12 Vantage. The Rapide will compete in near-standard specification apart from mandatory changes required to compete in this most demanding of endurance races and will be driven by a team of engineers from the company's Gaydon headquarters in Warwickshire, England.

Aston Martin Chief Executive, Dr Ulrich Bez who will lead the Rapide driver team, explained: "This race represents the ultimate final engineering durability test for any sports car - it subjects the car to the toughest possible assessment under public scrutiny. "The Rapide has the capability to carry four people in comfort but first and foremost it is a sports car and we will subject it to the same tests we would our other sports cars. We already have a proven track record at the Nürburgring racing our road cars with limited modification and in recent years we have enjoyed success in winning the SP8 class both in 2008 and 2009."

The Rapide race car will be close to production standard with only essential race safety modifications, interior trim removed to reduce weight, re-tuned suspension and will run on slick tyres designed for track use. The Aston Martin Rapide encapsulates the values of Aston Martin in pure four-door sports car form with an unrivalled combination of performance, comfort, craftsmanship and exceptionally elegant design. Since the Rapide's original premiere at the Frankfurt Motor Show in 2009 the car has gone on to win the widespread approval of customers and media commentators alike, prompting strong global demand for the car. Deliveries of the Rapide commence later this month through Aston Martin's 125-strong global dealership network.

The Rapide race car will be joined by a V12 Vantage - again modified only slightly for racing - which in 2009 swept to a class win on its competitive race debut. The near production standard V12 Vantage - which finished in 21st place overall last year - saw off competition from a field of largely specialist race cars in the SP8 class to claim an impressive debut win.

Further details on the V12 Vantage and the full driver line-ups for both Aston Martin entries plus details on a number of customer teams competing in the race will follow in the coming weeks.

The 38th ADAC Nürburgring 24 hour race will take place on 15/16 May 2010.

2010 Aston Martin Sports Car Rapide Nurburgring Race Car

The Aston Martin Rapide Nurburgring race car has been unveiled today and the company says it will make its debut in the 24-Hour event that will take place on 15/16 May 2010. Previously, Aston Martin has competed in the Nurburgring 24-Hour race with the V8 Vantage and the V12 Vantage. for this year, the British brand goes four-door.

Aston Martin Rapide

For all those who thought Aston Martin had somehow gone soft by offering a four-door saloon, the famed British marque plans to prove the new Rapide is no slouch by entering it in the 38th ADAC Nurburgring 24-hour race on May 15-16. Piloting the vehicle win the grueling race will be none other than Aston Martin’s CEO Dr. Ulrich Bez, who at age 66 can still give the young guns a run for their money. Aston, with Bez at the wheel, has won top honors in the race’s production-based SP8 category for the past two years with versions of the Vantage coupe.

The Aston Martin Rapide Nurburgring will been entered in the race as company's Chief Executive, Dr Ulrich Bez considers this event represents the ultimate durability test for any sports car.

The Aston Martin Rapide Nurburgring is extremely close to the production car. The only differences between the Aston Martin Rapide Nurburgring and the production model include the removal of interior trim to save weight, re-tuned suspension and slick tires.

PRESS RELEASE:

Aston Martin Rapide to contest gruelling Nürburgring 24-hour Race

Gaydon, Warwickshire 6 April 2010. Aston Martin will return to the starting grid of the legendary Nordschleife circuit for the fifth consecutive year at the 38th ADAC Nürburgring 24-hour race on 15/16 May 2010 with the marque's new four-door sports car; the Rapide.

Further underlining the sporting credentials of Aston Martin's latest model, the Rapide will compete in the demanding 24-hour race - as has been the case with other recent Aston Martin road cars, the V8 Vantage and V12 Vantage. The Rapide will compete in near-standard specification apart from mandatory changes required to compete in this most demanding of endurance races and will be driven by a team of engineers from the company's Gaydon headquarters in Warwickshire, England.

Aston Martin Chief Executive, Dr Ulrich Bez who will lead the Rapide driver team, explained: "This race represents the ultimate final engineering durability test for any sports car - it subjects the car to the toughest possible assessment under public scrutiny. "The Rapide has the capability to carry four people in comfort but first and foremost it is a sports car and we will subject it to the same tests we would our other sports cars. We already have a proven track record at the Nürburgring racing our road cars with limited modification and in recent years we have enjoyed success in winning the SP8 class both in 2008 and 2009."

The Rapide race car will be close to production standard with only essential race safety modifications, interior trim removed to reduce weight, re-tuned suspension and will run on slick tyres designed for track use. The Aston Martin Rapide encapsulates the values of Aston Martin in pure four-door sports car form with an unrivalled combination of performance, comfort, craftsmanship and exceptionally elegant design. Since the Rapide's original premiere at the Frankfurt Motor Show in 2009 the car has gone on to win the widespread approval of customers and media commentators alike, prompting strong global demand for the car. Deliveries of the Rapide commence later this month through Aston Martin's 125-strong global dealership network.

The Rapide race car will be joined by a V12 Vantage - again modified only slightly for racing - which in 2009 swept to a class win on its competitive race debut. The near production standard V12 Vantage - which finished in 21st place overall last year - saw off competition from a field of largely specialist race cars in the SP8 class to claim an impressive debut win.

Further details on the V12 Vantage and the full driver line-ups for both Aston Martin entries plus details on a number of customer teams competing in the race will follow in the coming weeks.

The 38th ADAC Nürburgring 24 hour race will take place on 15/16 May 2010.

2010 Aston Martin DBS Edo Competition Luxurious Sports Car

Edo Competition Aston Martin DBS is a result of a modification carried out by Edo Competition Motorsport for the 12-cylinder Aston Martin that already produces 517 horsepower and has a top speed of more than 300 km/h (186 mph). Improving and underlining the elegance and beauty of this British triumph and strengthening its sporting character was the goal declared by Edo competition.

2010 Aston Martin DBS Edo Competition

The first step taken by Edo Competition was improving the power output. The DBS’s engine control unit was modified via software recalibration, then supported by a new high performance exhaust system, and was fitted with special catalytic converters and high flow air filters. As a result, the DBS’s power output was increased from 517 hp and 570 Nm (420 ft-lb) to 550 hp and 600 Nm (442 ft-lb), an enough power to accelerate from 0 to 100 km/h (62 mph) in 4.1 seconds and continue on to a top speed of 320 km/h (199 mph).

The high performance exhaust system, which was specially designed for the DBS, incorporates butterfly valves allowing it to produce a fantastically rich and sonorous sound. They further help increase the British luxury sports car coupe`s power and torque output. The exhaust comes with a programmable control system that monitors backpressure inside the exhaust and opens the 70 mm butterfly valves when a pre-determined level of backpressure is exceeded. 

The unique advantage of this system is that it provides good torque at low engine speeds without sacrificing top end horsepower. The exhaust system is made from stainless steel and the chromed exhaust tips accentuate the elegant design. The driver can adjust the sound of the DBS at any time using a remote control.

Dealing with the levels of grip, Edo competition offers a new wheel design, a set of 21 inch racing wheels. The three-piece wheels come with stainless steel outer rims and the customer can choose the stock tire dimensions

Further, Edo competition has developed a new high performance brake system, 405 mm rotors with 6-piston monoblock calipers and performance brake pads for the front and 380 mm rotors with 6-piston monoblock calipers and performance brake pads for the rear, both including braided stainless steel brake lines.

As with all edo competition models, we set no limit to our customers` imaginations. Special interiors or lavish leather upholstery, individual requests are accommodated and executed with quality.

The modifications of this Edo competition Aston Martin DBS are all carried out at Edo competition Motorsport GmbH in Ahlen, Germany.

2010 Aston Martin DBS Edo Competition Luxurious Sports Car

Edo Competition Aston Martin DBS is a result of a modification carried out by Edo Competition Motorsport for the 12-cylinder Aston Martin that already produces 517 horsepower and has a top speed of more than 300 km/h (186 mph). Improving and underlining the elegance and beauty of this British triumph and strengthening its sporting character was the goal declared by Edo competition.

2010 Aston Martin DBS Edo Competition

The first step taken by Edo Competition was improving the power output. The DBS’s engine control unit was modified via software recalibration, then supported by a new high performance exhaust system, and was fitted with special catalytic converters and high flow air filters. As a result, the DBS’s power output was increased from 517 hp and 570 Nm (420 ft-lb) to 550 hp and 600 Nm (442 ft-lb), an enough power to accelerate from 0 to 100 km/h (62 mph) in 4.1 seconds and continue on to a top speed of 320 km/h (199 mph).

The high performance exhaust system, which was specially designed for the DBS, incorporates butterfly valves allowing it to produce a fantastically rich and sonorous sound. They further help increase the British luxury sports car coupe`s power and torque output. The exhaust comes with a programmable control system that monitors backpressure inside the exhaust and opens the 70 mm butterfly valves when a pre-determined level of backpressure is exceeded. 

The unique advantage of this system is that it provides good torque at low engine speeds without sacrificing top end horsepower. The exhaust system is made from stainless steel and the chromed exhaust tips accentuate the elegant design. The driver can adjust the sound of the DBS at any time using a remote control.

Dealing with the levels of grip, Edo competition offers a new wheel design, a set of 21 inch racing wheels. The three-piece wheels come with stainless steel outer rims and the customer can choose the stock tire dimensions

Further, Edo competition has developed a new high performance brake system, 405 mm rotors with 6-piston monoblock calipers and performance brake pads for the front and 380 mm rotors with 6-piston monoblock calipers and performance brake pads for the rear, both including braided stainless steel brake lines.

As with all edo competition models, we set no limit to our customers` imaginations. Special interiors or lavish leather upholstery, individual requests are accommodated and executed with quality.

The modifications of this Edo competition Aston Martin DBS are all carried out at Edo competition Motorsport GmbH in Ahlen, Germany.

Exotic design Aston Martin AMV10 concept car

New Aston Martin AMV10 concept car

Cool design Aston Martin AMV10 concept car

amazing design Aston Martin AMV10 concept car

wow greats exotic Aston Martin AMV10 concept car

luxury design Aston Martin AMV10 concept car

this greats design luxury and exotic aston martin amv10 concept car for future. i think this design car is modern futuristic.

Volare The Aston Martin Sports Car Concept is an eco-friendly

Aston Martin Volare is an eco-friendly

The Aston Martin Volare is a proposal for a next-generation Aston Martin supercar which features an environmentally friendly drivetrain. Aston Martin, like all other supercar manufacturers, faces a dilemma over the next decade; How to dramatically reduce the carbon footprint of their vehicles while also maintaining performance levels which are equal, or superior, to past models.

 

Volare The Aston Martin Sports Car Concept

The Aston Martin Volare is a design study of a two-seater sportscar that combines the typical styling cues of the brand with a fuel-cell powertrain and an interior characterized by the use of eco-friendly materials. The author is Coventry graduate James Trim. The two-seater Aston Martin Volare Concept features a high-power fuel cell stack, located between the front seats, a rear mounted battery pack, and a co-axial electric motor at the front. To aid the Volare’s weight distribution, the two hydrogen storage tanks have been positioned directly above the car’s rear axle. The Aston Martin Volare concept was a vehicle developed by James Trim during his final year at Coventry University studying Automotive Design. He is currently looking for placement opportunities.

Volare The Aston Martin Sports Car Concept 

Speaking about the exterior design of the concept, James Trim explains, "The underlying aim when designing the Volare was to combine present day technologies with the profile of a car that would be instantaneously recognisable as that of an Aston Martin."

Trim said of the design; “Aesthetically the vehicle sharpens up the familiar Aston Martin proportions, with much crisper shoulders and a noticeable ‘floating’ rear deck. The solid front grille was inspired by the older V8 Vantage, while the flexible front fenders can alter their shape to reveal daytime running lights or full headlamps.”

Volare The Aston Martin Sports Car Concept 

The interior uses eco-friendly leather. The materials used in the tanning process are derived from sustainable, farm bred, Mimosa trees. The natural extract from the trees is used to produce the chemicals necessary for farming leather.

This results in an enironmentally-friendly natural process, producing breathable and highly flexible hides. The center console is made from recycled aluminium. The emerging binnacle and Bang & Olufsen twin lens speakers add a touch of theatre to the cabin. "The principle concern being confronted by Aston Martin is the harmful impact their cars are having on the environment. With this in mind, the Aston Martin Volare retains the fantastic sound and outright performance customary with that of a gasoline equivalent.

Volare The Aston Martin Sports Car Concept  

Side from the eco-friendly drivetrain, another dictating factor in the Volare’s design was the desire to create a car which was instantly recognizable as an Aston Martin. It was important that the styling was influenced more by the heritage of the brand, rather than the source of power. On the Volare concept all the hallmarks of Aston Martin are instantly apparent, sleek profile, short front and rear overhangs, trademark grille, powerful rear arches and uncluttered lines.

Volare The Aston Martin Sports Car Concept is an eco-friendly

Aston Martin Volare is an eco-friendly

The Aston Martin Volare is a proposal for a next-generation Aston Martin supercar which features an environmentally friendly drivetrain. Aston Martin, like all other supercar manufacturers, faces a dilemma over the next decade; How to dramatically reduce the carbon footprint of their vehicles while also maintaining performance levels which are equal, or superior, to past models.

 

Volare The Aston Martin Sports Car Concept

The Aston Martin Volare is a design study of a two-seater sportscar that combines the typical styling cues of the brand with a fuel-cell powertrain and an interior characterized by the use of eco-friendly materials. The author is Coventry graduate James Trim. The two-seater Aston Martin Volare Concept features a high-power fuel cell stack, located between the front seats, a rear mounted battery pack, and a co-axial electric motor at the front. To aid the Volare’s weight distribution, the two hydrogen storage tanks have been positioned directly above the car’s rear axle. The Aston Martin Volare concept was a vehicle developed by James Trim during his final year at Coventry University studying Automotive Design. He is currently looking for placement opportunities.

Volare The Aston Martin Sports Car Concept 

Speaking about the exterior design of the concept, James Trim explains, "The underlying aim when designing the Volare was to combine present day technologies with the profile of a car that would be instantaneously recognisable as that of an Aston Martin."

Trim said of the design; “Aesthetically the vehicle sharpens up the familiar Aston Martin proportions, with much crisper shoulders and a noticeable ‘floating’ rear deck. The solid front grille was inspired by the older V8 Vantage, while the flexible front fenders can alter their shape to reveal daytime running lights or full headlamps.”

Volare The Aston Martin Sports Car Concept 

The interior uses eco-friendly leather. The materials used in the tanning process are derived from sustainable, farm bred, Mimosa trees. The natural extract from the trees is used to produce the chemicals necessary for farming leather.

This results in an enironmentally-friendly natural process, producing breathable and highly flexible hides. The center console is made from recycled aluminium. The emerging binnacle and Bang & Olufsen twin lens speakers add a touch of theatre to the cabin. "The principle concern being confronted by Aston Martin is the harmful impact their cars are having on the environment. With this in mind, the Aston Martin Volare retains the fantastic sound and outright performance customary with that of a gasoline equivalent.

Volare The Aston Martin Sports Car Concept  

Side from the eco-friendly drivetrain, another dictating factor in the Volare’s design was the desire to create a car which was instantly recognizable as an Aston Martin. It was important that the styling was influenced more by the heritage of the brand, rather than the source of power. On the Volare concept all the hallmarks of Aston Martin are instantly apparent, sleek profile, short front and rear overhangs, trademark grille, powerful rear arches and uncluttered lines.

2020 Aston Martin Twenty Twenty Sports Car concept designed by Giorgetto and Fabrizio Giugiaro of ItalDesign (2001)

2020 Aston Martin Twenty Twenty Sports Car concept

Geneva is one of the world's great auto shows, if for no other reason than it's the place where Italy's design houses and coachbuilders -carrozzerie- annually roll out their latest concept cars. This year, Aston Martin previewed the production version its voluptuous Vanquish (covered elsewhere in this issue). But that wasn't the only Aston on the show floor. The Aston Martin Twenty Twenty concept from 2001 was designed by Giorgetto and Fabrizio Giugiaro of ItalDesign.

2020 Aston Martin Twenty Twenty Sports Car concept

The fully-functioning concept car was intended as a vision for a convertible Aston Martin sports car for the year 2020. Italdesign sprung this amazing car on the unsuspecting visitors to the 2001 Geneva Salon L'Auto. This startling car, based on an early production DB7 Vantage, has a body shape made of exposed extruded aluminium structural elements; body panels made from plastic and carbon fibre are fitted onto it. Thankfully Aston Martin’s current styling trend is headed in a completely different direction to the Twenty Twenty concept.
The brushed aluminium highlighting lines which adorn the Aston Martin Twenty Twenty are an original design feature. However their overuse (especially around the front) gives the concept an unusual, almost comical appearance from some angles. The grille surround almost looks like lipstick.

2020 Aston Martin Twenty Twenty Sports Car concept

The Twenty Twenty is powered by front mounted, uprated version of the 6 litre V12 from the DB7 Vantage, said to produce 500bhp - visible through a grilled fairing on the bonnet. Initially it appears to be a strict 2 seater, although the rear bulkhead can be removed to provide seating for two children. The rear of the Aston Martin Twenty Twenty (from the doors back) is more appealing with more conservative use of bare aluminium. The soft top is stored in its own special housing that can be slotted into position between the roll-bar and the windscreen, 'Targa' fashion. Notice the fantastic door hinges - derived from the classic Aston wing vent, are both decorative and functional elements.

2020 Aston Martin Twenty Twenty Sports Car concept

Giorgetto Giugiaro and Aston Martin previously co-operated in 1961, when Carrozzeria Bertone worked on the two-seater DB4GT Jet coupe prototype. And like the original 'Jet' car, the 2020 is destined to remain unique. Aston Martin are believed to have thought the 2020 'interesting', but no plans were ever made even for limited production. As the Twenty Twenty isn't an official Aston Martin design project, don't look for any sort of production version. What about the name? Simple: It's the term commonly used to describe perfect vision. And the Giugiaros clearly have good eyes.

2020 Aston Martin Twenty Twenty Sports Car concept

In March 2004, I received an e-mail claiming the 2020 was for sale, but I have been unable to find any reference to this anywhere. But the car was seen for the first time in the UK at the Goodwood Festival of Speed, June 2005.